Genetic Code

In the News..

28-11-2006

Datastick® DAS-1294 PDA data collection for research

The Datastick® DAS-1294 data acquisition modules bring a high level of reliability, convenience, and versatility to handheld instrumentation for test and measurement in research applications.

The Tommi Melon

DataStick Vibration Spectrum Analyser Accessorries

Sensors

Cables

Rugged Cases

Power Adaptors & Batteries

Datastick DS140-1A Piezoelectric Industrial Accelerometer

This industrial-grade accelerometer is suitable for use with the Datastick VSA-1212 or any other device that uses ICP®-type accelerometers.

Specification

  • Sensitivity: ± 15% 100 mV/g
  • Frequency response:
    • ± 3 dB: 0.5 - 15,000 Hz (± 3 dB: 30 - 900,000 CPM)
    • ± 10%: 0.7 - 7,000 Hz (± 10%: 42 - 420,000 CPM)
  • Electrical Noise (Typical):
    • Broadband: 2.5 Hz - 25 kHz: 325µg, rms
    • Spectral:
      • 10 Hz: 28µg/Hz
      • 100 Hz: 3.3µg/Hz
      • 1000 Hz: 1.6µg/Hz
  • Dynamic Range: +50 g, peak
  • Power requirement: Voltage source: 18 - 30 VDC
  • Constant current excitation: 2 - 10 mA
  • Output Impedance: Max <100 ohm
  • Bias Output Voltage: 7 - 14 VDC
  • Temperature Range: -58 - 250°F (-50 - 121°C)
  • Maximum Shock Protection: 5,000 g, peak
  • Electrical Case Isolation: >108 ohm
  • Sealing: Welded, Hermetic
  • Submersible Depth: 500 ft
  • Sensing Element: PZT Ceramic
  • Sensing Structure: Shear Mode
  • Weight: 0.7 oz. (20 grams)
  • Case Material: 316L Stainless Steel
  • Mounting Hole: 1/4-28 (includes 1/4-28 mounting stud)
  • Cable: Requires DSC-MMB6 Cable (Cable not included.)

    • DSM-112 Magnetic Accelerometer Mount

    Rare-earth two-pole magnetic mount for mounting on flat or curved surfaces. Stainless steel, 1-inch diameter, 0.7 inch high, with 1/4-28 integral stud.

    DSC-MMB6 Cable

    For the DS140-1A accelerometer. 6-foot light-weight Polyurethane jacketed cable, black, twisted, shielded pair, 0.175 OD with two-socket mini-MIL connector on sensor end and BNC connector on analyzer end.

    RC-3-Y Rugged Case for VSA

    Fully assembled ruggedized case for a Datastick VSA-1212 Vibration Spectrum Analyzer module with the appropriate Palm Powered handheld*. Includes RC-1, DB-1, and PK-1 with pass-through BNC connector and cable, assembled

    • no assembly required
    • handheld, module, and cable insert securely in case
    • PDA is easy to use through recessed, clear plastic screen
    • pass-through BNC connector and interior cable for sensor connection
    • waterproof, dustproof & airtight
    • crushproof

    * Palm™ Tungsten™ T, T2, T3, or C or Garmin® iQue 3200 or iQue 3600 handheld

    SR-1 Screen Replacement Kit

    The screen replacement kit includes 3 new screens, silicon gaskets for the box, Buna gasket for the screen, and a model specific foam insert. This kit can also be used to convert to a different model PDA.

    BC-1 Belt Clip

    Allows the RC-1 to be attached to any belt or strap. Belt clip is indexable to keep unit from being accidentally pushed off when sitting.

    NS-1 Neck Strap

    Mounts to the back of the case allowing the RC-1 to comfortably hang around the user's neck. High quality neoprene padded neck strap.

    UPA-5 Universal Power Adapter for DAS and VSA Modules

    • High-quality, universal, regulated power adapter.
    • Provides 5 VDC external power to the DAS or VSA module.
    • Allows use of the DAS or VSA module without AAA batteries.
    • 110-240 VAC 50/60 Hz in, 5 VDC out.

    MAH-1800 Battery Pack Kit for DAS and VSA modules

    Battery pack complete with wall transform charger, 12 V AC car outlet charger, and vinyl case with belt and clip. Works with any DAS or VSA module.

    • 1800 mAh NiMH
    • 6V
    • Four stage battery gauge indicator
    • 500mA charge current
    • 3-hr charge time
    • 7.5V 500 mA (AC Adapter included) charger output power