Genetic Code

In the News..

28-11-2006

Datastick® DAS-1294 PDA data collection for research

The Datastick® DAS-1294 data acquisition modules bring a high level of reliability, convenience, and versatility to handheld instrumentation for test and measurement in research applications.

The Tommi Melon

DataStick Data Acquisition System Accessorries

Breakout Boards

Signal Adaptor Boards

Rugged Cases

Cables

Power Adaptors & Batteries

BB-7P Breakout Board for DAS modules

  • Facilitates initial setup and calibration of different sensor arrays.
  • Allows the DAS module to be used with ONE 4-20 mA sensor.
  • Screw-terminal inputs for four analog sensor channels, one digital channel, external trigger, and ground.
  • Connects with DAS-1254 and DAS-1294 modules with a DXM-5445 Adapter Cable.(Cable not included.)

BB-8P Breakout Board for the DAS-1206

  • Facilitates initial setup and calibration of different sensor arrays.
  • Screw-terminal inputs for six sensor channels, external trigger, and ground.
  • Includes 6-foot 8-pin mini-DIN cable.

Signal Adaptor Boards

The SB-675 and SB-675ZP are signal adapter boards that enable Datastick DAS modues to read measurements across a wide range of unipolar and bipolar input voltages and to supply power to sensors with a wide range of power requirements.

In addition, the SB-675ZP provides high impedance analog and digital input isolation to protect the DAS module from voltage surges, and it provides power to the DAS module and the Palm handheld attached to it.

Both boards are designed to allow placement inside industrial enclosures with or without sensor arrays and other equipment. Both include 110 VAC, 60 Hz in, 24 VDC out power adapters. They can also be powered by commercially available rechargeable batteries.

SB-675ZP High-Impedance Multirange Signal Adapter Board for DAS modules

  • Multirange signal-conditioning adapter board
  • Four analog inputs, one digital input
  • Selectable voltage range for each analog input
  • Unipolar or bipolar analog inputs
  • High impedance (20 MOhm) isolation on analog inputs
  • Optical isolation of the input lines
  • Selectable power output for sensors
  • Supplies power to DAS module and Palm handheld
  • 24 V, 400 mA external power supply is included
  • Requires DXM-5445 Adapter Cable (Cable not included.

SB-675ZP High-Impedance Multirange Signal Adapter Board for DAS modules

  • Multirange signal-conditioning adapter board
  • Four analog inputs, one digital input
  • Selectable voltage range for each analog input
  • Unipolar or bipolar analog inputs
  • Selectable power output for sensors
  • Supplies power to DAS module and Palm handheld
  • 24 V, 400 mA external power supply is included
  • Requires DXM-5445 Adapter Cable (Cable not included.

RC-3-Y Rugged Case for VSA

Fully assembled ruggedized case for a Datastick DAS-1254 or DAS-1294 with the appropriate Palm Powered handheld*. Includes RC-1, DB-1, and CK-1, assembled

  • no assembly required
  • handheld, module, and cable insert securely in case
  • PDA is easy to use through recessed, clear plastic screen
  • pass-through BNC connector and interior cable for sensor connection
  • waterproof, dustproof & airtight
  • crushproof

* Palm™ Tungsten™ T, T2, T3, or C or Garmin® iQue 3200 or iQue 3600 handheld

CK-1 Through the Box Connectivity Kit

Through the box connectivity kit allows for multiple sizes of sensor cables to pass through the case and connect to your PDA.

SR-1 Screen Replacement Kit

The screen replacement kit includes 3 new screens, silicon gaskets for the box, Buna gasket for the screen, and a model specific foam insert. This kit can also be used to convert to a different model PDA.

BC-1 Belt Clip

Allows the RC-1 to be attached to any belt or strap. Belt clip is indexable to keep unit from being accidentally pushed off when sitting.

NS-1 Neck Strap

Mounts to the back of the case allowing the RC-1 to comfortably hang around the user's neck. High quality neoprene padded neck strap.

DXM-20C6 20-Conductor DXM Cable

6-foot, 20-conductor cable with 20-pin shielded harpoon-lock DXM connectors on each end. Provides for all analog, digital, and power lines into and out of the DAS-1254 and DAS-1294 modules.

DXM-4420 Adapter Cable for 4-20 mA Inputs

Adapter cable enables 4 channels of 4-20 mA analog inputs, as well as digital input and output triggering lines, for use with the DAS-1254 and DAS-1294 modules. It consists of a 20-pin shielded harpoon-lock DXM connector with a 6-foot, 8-conductor cable.

DXM-5445 Adapter Cable for the BB-7P Breakout Board and SB-675/675ZP Signal Processing Boards

Adapter cable allows the use of the BB-7P Breakout Board and SB-675/675ZP Signal Processing Boards to be used with the DAS-1254, DAS-1294, and VSA-1212 modules.

UPA-5 Universal Power Adapter for DAS and VSA Modules

  • High-quality, universal, regulated power adapter.
  • Provides 5 VDC external power to the DAS or VSA module.
  • Allows use of the DAS or VSA module without AAA batteries.
  • 110-240 VAC 50/60 Hz in, 5 VDC out.

MAH-1800 Battery Pack Kit for DAS and VSA modules

Battery pack complete with wall transform charger, 12 V AC car outlet charger, and vinyl case with belt and clip. Works with any DAS or VSA module.

  • 1800 mAh NiMH
  • 6V
  • Four stage battery gauge indicator
  • 500mA charge current
  • 3-hr charge time
  • 7.5V 500 mA (AC Adapter included) charger output power